+8613505407298
trihope@aliyun.com
1. Qalabka mashiinka oo dhan waxaa farsameeyay Jarmalka SHW pentahedron xarunta hal mar.
2. Wuxuu qaataa nidaamka Delem DAC360 CNC
3. Qabsaday Jarmalka BOSCH habka hawo-biyoodka isku dhafan.
4. xagasha xiirashada si fudud ayaa loo hagaajin karaa iyada oo loo marayo barnaamijka si looga fogaado qallafsanaanta qalabka shaqada ee ay keento goynta.
5. Dhererka istaroogga bim ee sare si toos ah ayaa loo hagaajin karaa si loo ogaado goynta degdega ah ee saxda ah ee gaaban iyo yar yar si loo hagaajiyo waxtarka shaqada.
6. Nidaamka CNC wuxuu si toos ah u hagaajin doonaa farqiga daabadaha iyadoo loo eegayo dhumucda xaashida kala duwan iyo walxaha si loo hagaajiyo tayada goynta.
7. daab afar geesood ah ayaa la qaatay si loo wanaajiyo nolosha adeega daabka taasoo aad uga wanaagsan kan lulida.
8. Naqshad cusub oo dhabarka ah, qaab dhismeed deggan, wanaaji iska caabbinta xidhashada, u qalmida shilka wax badan.
| Sharaxaada | Unug | 10*3000 | ||
| Dhumucda xiirida (mm) | Bir khafiif ah 450Mpa | mm | 0.8-10 | |
| Birta Aan Lahayn 600Mpa |
| 0.8-7 | ||
| Aluminium 300Mpa |
| 0.8-12 | ||
| Dhererka Xiritaanka | mm | 3070 | ||
| Xagasha Xiritaanka | ° | 0.5°-2° | ||
| Dib-u-eegis | Faalig mm | mm | 5 ~ 1000 | |
| Xawaaraha mm/s | mm/s | ≤250 | ||
| Saxnimada mm | mm | ±0.1 | ||
| Servo Motor Power KW | KW | 1 | ||
| Waqtiyada istaroogga | hpm | 15-32 | ||
| Awoodda Baaloodh (L) | L | 370 | ||
| Tirada isku-qabsiga | maya | 14 | ||
| Awoodda Baabuurka ugu Weyn (KW) | KW | labaatan iyo laba | ||
| Nidaamka CNC | Holland Delem DAC360 Nidaamka CNC ee xakameynaya xagasha xiirashada, farqiga daabadaha, iyo istaroogga xiirashada | |||
| Tirada iyo dhererka cududda taageerada (mm) | mm | 3*1400 | ||
| Qiyaasta dulucda | Dhererka (mm) | mm | 3720 | |
| Ballaca (mm) | mm | 3040 | ||
| Dhererka (mm) | mm | 1880kii | ||
Q1: Tani ma mashiinka xiirashada guillotine ee CNC waa mashiinka caadiga ah?
J: Haa, Ku dhawaad qaabka mashiinka birta birta ah ayaa go'an sababtoo ah cabbirka wax-qabadka iyo dhumucda alaabta. Laakin waxa aad habayn kartaa astaanta qaybaha mashiinkaaga, kaas oo noo diyaar ah.
Q2: Ma ku bixin kartaa adeegga rakibaadda iibka ka dib iyo adeegga hawlgelinta goobtayaga?
Haa, waxaan u haynaa kooxda xirfadlayaasha ah ee adeega iibka kadib. Waxaan ku siin doonaa buug-gacmeedka rakibaadda iyo fiidiyowga marka mashiinka la keenayo, Haddii aad u baahan tahay, waxaan sidoo kale u wakiin karnaa injineerada inay soo booqdaan goobtaada rakibida iyo komishanka. Waxaan ballan qaadeynaa inaan ku siin doono 24 saacadood oo jawaab celin online ah markaad u baahato wax caawimaad ah.
Q3: Waa maxay muddada lacag bixintaada?
Waxaan ku aqbali karnaa TT ama LC
Q4: Ilaa intee ayay tahay dammaanadda mashiinka?
Mashiinka leh dammaanad hal sano ah, haddii qaybo ka mid ah jaban yihiin, waxaanu u soo diri doonaa agab cusub iibsadaha iyada oo loo sii marayo DHL 24 saacadood gudahood, dayactirka nolosha-dheer
